Vestas relies on Markforged for end-to-end solution to achieve vision of DDM

assets/files/images/05_05_22/V112_Macarthur_AUS_2.jpg.coredownload.jpg

Vestas is a wind energy solutions provider. With +151 Gigawatts (GW) of wind turbines in 86 countries, Vestas has installed more wind power than its competitors. 

When it comes to alternative energy technology, wind turbines are easily the most recognisable. Towering at heights of 137 to 259 m (450 to 850 ft) with rotor diameter between 109-236 m (360-774 ft), they dominate their surroundings and are often visible for miles. If you’ve ever seen a wind turbine, chances are it was manufactured by Vestas.

Vestas began in post-World War II Denmark as a small, family-run manufacturer. For many years, the company built and supplied hydraulics for light trucks. During the 1970s, it began to develop alternative energy solutions, completing its first commercial wind turbine in 1979. Focusing exclusively on wind turbine production since 1989, the company designs, manufactures, installs, and services wind turbines across the globe. Today, Vestas claims to be the world’s largest on and offshore wind turbine and wind turbine blade manufacturer. The company has headquarters in Denmark, several regional offices, and 15+ manufacturing plants worldwide. 

  • Vestas was named the most sustainable company in the world in 2022 per Corporate Knights’ Global 100 ranking. 
  • The Vestas Sustainability Strategy includes producing zero-waste wind turbines by 2040. 
  • Additive manufacturing is contributing to helping Vestas achieve its sustainability goal of net-zero decarbonisation by 2030. Customer Success Story Vestas 

The challenge

Wind turbines are massive and expensive machines that must function reliably with minimal downtime in order to be as effective as possible. That means there’s no room for error when it comes to manufacturing and installation. As a result, Vestas depends on numerous inspection gauges at its manufacturing facilities and installation sites. These critical tools have traditionally been sourced from multiple vendors around the world based on detailed manufacturing instructions. 

The finished parts would be sent to the various Vestas sites, inspected for compliance, and – once approved – put to use. Unfortunately, some of the final parts supplied by local manufacturers were not 100% to spec and did not pass final inspection. This resulted in final product delivery and installation delays. 

Even when parts made it through the specialised inspection process, most were manufactured using time consuming and costly traditional machining methods and raw materials. Take, for example, the top centre (TC) marking tools. These critical tools — used by Vestas to mark the root end of turbine blades to align pitch – would typically take about five weeks to produce. 

To make matters worse, due to limits on machined designs, the Vestas team would have to order multiple versions of the TC marking tool to fit a range of blades. Or, consider the lightning tip receptors designed to reduce lightning strike damage. These receptors are built via subtractive manufacturing in aluminium requiring at least 12 weeks to produce. 

“We selected Markforged because they were the most capable of providing the end-to-end solution we needed to achieve our vision of DDM,” said Jeremy Haight, Principal Engineer, Additive Manufacturing & Advanced Concepts at Vestas.

“Vestas is democratising manufacturing by putting it into the hands of our end users while maintaining a centralised engineering control model.”

The solution

The Vestas team began researching alternative ways to improve their overall manufacturing process. Using Markforged’s cloud-based, AI-powered Digital Forge additive manufacturing platform, the company successfully launched its direct digital manufacturing (DDM) program in 2021. The program frees up manufacturing processes from relying on outside suppliers and provides a knowledge base for collaboration. 

The DDM program already includes 2000+ Vestas parts stored in a Markforged Eiger cloud-based digital repository. This allows employees at any Vestas location – with little to no additive manufacturing expertise – to quickly search for and print any number of fibre-reinforced composite parts on their local X7 and composite parts on their Onyx One 3D printers.

According to Jeremy Haight, Principal Engineer – Additive Manufacturing & Advanced Concepts at Vestas, “Our approach is end-to-end. We provide the physical article in near real-time to a variety of places. It’s the closest thing to teleportation I think you can get.” Thanks to the repository, the Vestas team knows they will get consistent, up-to-spec parts at a moment’s notice, anywhere in the world, without the need for specialists at their global facilities. This has dramatically reduced shipping and freight costs, and manufacturing lead times. 

A few examples of how DDM works can be seen with the aforementioned TC marking tools and lightning tip receptors. The TC marking tool that previously took weeks and thousands of dollars to produce is now being made in only a few days. And because the tool is printed using fibre-reinforced Onyx, a durable, lightweight nylon blend material, the formerly-metal parts now weigh 85% less than before. As for the lightning tip receptors, local blade manufacturing sites will be able to produce them in 3D printed copper at the point of need. Vestas estimates that, once implemented, each of these receptors will take about two days to make. 

Most importantly, the Vestas team no longer has to worry about these or any other parts failing compliance tests because they are printed on-demand and in-house using exact digital specifications. Also, accuracy of tools is verified using Markforged Blacksmith for in-process inspection, analysis, and reporting. 

The future

Vestas sees DDM as critical for new product development and tool and end-use part availability throughout its business. In 2022, the company will begin rolling out DDM for inspection gauge tooling beyond its blades to facilitate on-demand gauge production at all 23 of its manufacturing locations. Vestas has also partnered with Wurth to build an additive ecosystem and manage an inventory of spare parts made with The Digital Forge platform to support maintenance, repair, and operations (MRO) for local field support and other suppliers. 

Once the initial roll-out is complete, Vestas will turn its attention to implementing a more in-depth, end-to-end process at its sites. The company is making it easier for individuals at any Vestas site with the right permissions to scan a part code or search for a part in its enterprise asset management (EAM) and enterprise resource planning (ERP) systems, and have it automatically sent to the right local 3D printer. This centralized control of users, printers, and parts inspection, using Blacksmith and Eiger Fleet, will ensure high-quality, high-performing tools and end-use parts that do the jobs they’re designed to do. The more Vestas brings manufacturing in-house via additive manufacturing, the faster its products will reach the market, and the more time and money it will save in the process. 

“Both DDM and Markforged release Vestas from constantly relying on outside manufacturers. They also democratise and open up new avenues for our company. Markforged’s Digital Forge is a game changer,” concluded Haight.

Add a Comment

No messages on this article yet

Editorial: +44 (0)1892 536363
Publisher: +44 (0)208 440 0372
Subscribe FREE to the weekly E-newsletter