RFID Print and Apply Solution

Send to friend

New from Tharo Systems, Inc., the creators of EASYLABEL bar code and product identification labeling software, comes the PA1000tZ RFID enabled Smart Label Printer/Applicator using the Zebra R4Mplus(tm) thermal transfer printer.

Designed to meet the RFID requirements of major retailer and government agency suppliers, the Zebra R4Mplus(tm) is an EPC-compatible (Electronic Product Code) RFID smart label printer/encoder with UHF transponder support. The R4Mplus(tm) not only encodes and verifies smart labels but also prints text, graphics and bar codes.

The PA1000t Tamp applicator ships with a large capacity unwind/rewind that reduces the number of times you need to change label stock. The PA1000t applicator can apply labels to the top or side of products of varying height. Heavy guide rods were engineered to compensate for high stress in side labeling with minimal deflection.

Depending on the durability of the transponder in the smart label, Tharo also has available the PA1000t/b Tamp/Blow applicator. The PA1000t/b is suited for applying labels to convex, concave, flat or delicate surfaces, on either the top or side of a product. The adjustable guide rods stop the Tamp Pad " from the product, from there the smart label is blown on.

Tharo Systems has combined the powerful PA1000t and PA1000t/b applicators with the newest of Zebra's R series of printer/encoders, the flexible Zebra R4Mplus(tm), to create the PA1000tZ RFID Smart Label Printer/Applicator. The PA1000tZ can print and apply up to 58 smart labels per minute.

Comments (0)

Add a Comment

This thread has been closed from taking new comments.